您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 19691-2008 地理标志产品 狗牯脑茶

作者:标准资料网 时间:2024-04-28 23:12:49  浏览:9086   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:地理标志产品 狗牯脑茶
英文名称:Product of geographical indication - Gougunao tea
中标分类: 食品 >> 饮料 >> 茶叶制品
ICS分类: 食品技术 >> 茶、咖啡、可可 >> 茶
替代情况:替代GB 19691-2005
发布部门:中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
发布日期:2008-06-03
实施日期:2008-12-01
首发日期:2005-03-23
作废日期:
主管部门:国家标准化管理委员会
提出单位:全国原产地域产品标准化工作组
归口单位:全国原产地域产品标准化工作组
起草单位:江西省标准化协会、遂川县狗牯脑茶厂
起草人:余国平、胡奕浓、涂建、郭长生
出版社:中国标准出版社
出版日期:2008-11-01
页数:平装16开/页数:8/字数:12千字
计划单号:20065077-T-469
书号:155066·1-32903
适用范围

本标准规定了狗牯脑茶的地理标志产品保护范围、术语和定义、分级、要求、试验方法、检验规则、标志、标签和包装、运输、贮存。本标准适用于国家质量监督检验检疫行政主管部门根据《地理标志产品保护规定》批准保护的狗牯脑茶。

前言

没有内容

目录

没有内容

引用标准

GB/T 191 包装储运图示标志
GB 2762 食品中污染物限量
GB 2763 食品中农药最大残留限量
GB 7718 预包装食品标签通则
GB/T 8302 茶 取样
GB/T 8304 茶 水分测定
GB/T 8305 茶 水浸出物测定
GB/T 8306 茶 总灰分测定
GB/T 8307 茶 水溶性灰分和水不溶性灰分测定
GB/T 8308 茶 酸不溶性灰分测定
GB/T 8309 茶 水溶性灰分碱度测定
GB/T 8310 茶 粗纤维测定
GB/T 8311 茶 粉末和碎茶含量测定
GB 9683 复合食品包装袋卫生标准
GB 11680 食品包装用原纸卫生标准
SB/T 10035 茶叶销售包装通用技术条件
SB/T 10157 茶叶感官审评方法

所属分类: 食品 饮料 茶叶制品 食品技术 茶 咖啡 可可 茶
下载地址: 点击此处下载
基本信息
标准名称:碳化硅耐火材料化学分析方法 气体容量法测定碳化硅量
英文名称:Chemical analysis for silicon carbide refractories-Determination of silicon carbide-Gas volumetric method
中标分类: 建材 >> 耐火材料 >> 硅质耐火材料
ICS分类: 玻璃和陶瓷工业 >> 耐火材料
替代情况:被GB/T 16555-2008代替
发布部门:国家技术监督局
发布日期:1996-09-27
实施日期:1997-03-01
首发日期:1996-09-27
作废日期:2009-04-01
主管部门:国家标准化管理委员会
提出单位: 全国耐火材料标准化技术委员会
归口单位:全国耐火材料标准化技术委员会
起草单位:武汉冶金建筑研究所
起草人:林炳熹、冯毅
出版社:中国标准出版社
出版日期:1997-03-01
页数:平装16开, 页数:8, 字数:15千字
适用范围

本标准规定了气体容量法测定游离碳量、总碳量和碳化硅量的方法提要和原理、试剂和材料、仪器设备、试样、分析步骤、分析结果的表述及允许差。本标准适用于不含石墨的碳化硅耐火材料中游离碳量、总碳量和碳化硅量的测定。测定范围:游离碳0.10%~5.00%,总碳3.00%~15.00%,碳化硅5.00%~45.00%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 建材 耐火材料 硅质耐火材料 玻璃和陶瓷工业 耐火材料
Product Code:SAE J476
Title:Dryseal Pipe Threads
Issuing Committee:Fasteners Committee
Scope:The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material.The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.